Headstock
Pulley Gear, 30T To 22055 Old Part No. was LA-119 or 18A-30119 See also: LP-1165 $187.75 | Pull Pin For LP-1221 Old Part No. was LB-13 or 36A-20013 $30.00 |
Spindle Gear, 42T Old Part No. was 2025 or 18A-32025 $127.50 | Spindle Gear, 46T Old Part No. was LA-1018 or 18A-31018 $155.25 |
Spindle Gear, 30T Old Part No. was LA-665-1 or 18A-31337 See also: La-215 $104.75 | Bull Gear, 72T From 18063 To 35721 Old Part No. was LA-120-1 See also: LP-1205 $563.75 |
Bull Gear, 72T. From 37063 Old Part No. was LA-654-2 or 18C-31334 See also: LP-1379 $563.75 | Spring From 37063 Old Part No. was LA-346 or 36A-30346 See also: La-248 $7.50 |
Pull Pin For Bull Gear From 37063 Old Part No. was LA-345 or 36A-30345 See also: La-245 $67.50 | Pulley Gear, 30T, w/Oilite From 62130 Old Part No. was LA-656-1 or 18A-31335 See also: LP-1467 $187.75 |
Bull Gear, 72T. From 35722 To 64399 Old Part No. was LA-120-2 or L-1744 See also: LP-1198 $548.25 | Bull Gear, 90T. For all 11" Logan lathes Old Part No. was LA-1003 or 18C-31003 $566.25 |
Eccentric Bushing, w/Oilite Old Part No. was LA-1020 or 19A-31020 $35.00 | Headstock Clamp Old Part No. was LA-1022 or 35A-31022 $40.00 |
Bull Gear, 78T. Old Part No. was LB-4 or 18C-20004 $484.00 | Hinge Block Old Part No. was LA-331 or 31A-30331 $41.75 |
Take-Up Nut, Rear Old Part No. was LA-666 or 16A-30666 $54.25 | Take-Up Nut Old Part No. was LA-686 or 16A-30686 See also: La-667 $107.00 |
Sleeve, 3 Deg. 45 Min. To #2 MT To 52576 Old Part No. was LA-1021 or 24A-31021 See also: LP-1350 $157.50 | Rubber Bushing From 11325 Old Part No. was LA-658 or 19A-30658 1" OD, 3/8" ID Price per each $19.50 |
Spindle Reducing Sleeve for 9" and 10" Lathes
Was LA-223 $132.25 | Sleeve, 2 Deg. To #2 MT From 52576 Old Part No. was LA-1021-1 or 24A-31342 See also: LP-1266 $157.50 |
Bull Gear, 72T To 37063 Old Part No. was LA-654 or $658.75 | Bull Gear Assembly, 72T. For 800 Series lathes, prior to S/N 37063 was LA-28 $731.75 |
Take-Up Nut for 200 Series and Wards Lathes (was LA-259) $59.25 | Retaining Collar for 200 Series and Wards Lathes (was LA-130-1) $49.75 |
Take-Up Nut Old Part No. was LA-1019 or 16A-31019 $84.50 | Hinge Bracket Old Part No. was LA-1023 or 23A-31023 See also: LP-1827 $82.00 |
Rubber Foot was 0647 $19.75 | Spindle, 2 Deg Taper From 52576 Old Part No. was LA-1010-1 or 07C-31341 For 11" Lathe $1,997.00 |
Spindle Spacer (was LA-1017) $82.00 | Sleeve, 2 Deg. To #3 MT, 1-5/8Dia. Old Part No. was 6023 or 24A-36023 $157.50 |
Spring Wire Old Part No. was 6034 or 41A-36034 $5.25 | Spindle Adapter for Model 6565 and 6530, #3 Morse Taper (Was 6832) $134.75 |
Spindle Reducing Sleeve For South Bend Lathes 1.63" OD, 0.602 Taper per Foot #3 Morse Taper ID $140.00 | Center, #2 MT, Carbide Tipped 0.0002" TIR Accuracy Old Part No. was LA-187 or 38A-30187 $82.00 |
Center, #3 MT, Carbide Tipped Old Part No. was 6113 or 38A-36113 $130.00 | Spanner Wrench For L-00 Old Part No. was 2314 or 39A-32314 $94.50 |
Rubber Bumper, 1/4" was 0634 $5.25 |
- Bison and TMX Chucks
- Machine Manuals
- T-Shirts and Videos
- Headstock
- Back Gears
- Spindle Gears
- Change and Reverse Gears
- Quick Change Gearbox Parts
- Compound Rest
- Carriage Parts
- Threading Dial
- Tailstock and Turret Parts
- Drive
- Taper Attachment
- Collets and Collet Closers
- Face Plates and Drive Plates
- Chucks and Chuck Backs
- Steady and Follow Rests
- Toolposts and Sets
- Machine Tool Accessories
- Wrenches
- Ball and Oilless Bearings
- Used Parts
- Motors
- Ball Oiler
